Convert any toilet into bidet for just $16. Call 1 - 888 - 684 - 6310
  Installation Methods

No tools required except a screw driver to unscrew toilet seat

Stop the main water supply to flush tank by turning off the valve.

Unscrew the faucet connected to the flush tank. If the toilet faucet is hard pipe, change it to flexible pipe.

Fix the 4 way to the flush tank inlet, please put the cone shaped washer (not shown in picture) inside the 4 way          before connecting to flush tank.

Fix the Hydrojet’s valve to 4-way which is pointed towards the toilet bowl or front.

Close the other end of the 4-way with the cap. Please make sure that washer is inside the cap.

Fix the toilet faucet back to the bottom of the 4-way.

Unscrew the toilet seat using a plier and or screw driver to fix the jet under the seat. Tighten the seat screw          back only after confirming the center of jet.

Release the main water supply valve to allow water flow. Turn on the Hydrojet valve slowly to test the position          of the water jet.

Hydrojet Bidet Standard Installation
Hydrojet Bidet Hot and Cold Water Installation 
Hydrojet bidet installation on Single Piece Toilet
Hydrojet Bidet Left Hand Version Installation
Our Products
Hydrojet Bidet Standard Version
» Easy to install - plumber not required.
» Suitable for all standard toilets.
Single Piece Version for Single Piece or 1-Piece Toilet
» Easy to install - plumber not required.
» Smooth water controller, does not
take much space on toilet.
Hot and Cold Water Version for Standard Toilet
» Smooth water flow controller for Hot
and Cold water.

» No Electricity required and
maintenance free.
Left Hand Operation for Standard Toilet
» Smooth water flow controller on left
side
.
»
Suitable for all standard toilets.
HydroSpray
» Easy to install - plumber not required.
» Hand held sprayer suitable for all standard toilets.
Hydrojet Bidet Parts
4-Way with Cap
Jet
Hydrojet Valve with tube and Jet
Single piece T attachment with 4-way